PRODUCTS

ŞAPSER® PLUSCement-Based Polymer Reinforced Screed With Low Consumption

APPLICATION FIELD

Used for achieving smooth surfaces in interior and exterior areas.

REQUIREMENTS

  • Reduces the load of the building thanks to the light components it contains.
  • Saves time and labour.
  • Provides savings of 35-40% in terms of powder consumption.

TECHNICAL VALUES

Dry Bulk Density, kg/m³

800 ± 200

Wet Bulk Density, kg/m³

1350 ± 200

Adhesive Strength, N/mm²

> 0,5

Compressive Strength, N/mm²  

> 7

Bending Strength, N/mm²

> 3

 

APPLICATION

SURFACE PREPARATION  

  • The application surface shall be solid, clean and dry.
  • The surface shall be free of oil, dust, paint and materials that reduce adherence.
  • Repairs required on old floors shall be made using appropriate Entegre Repair Mortars.

PREPARATION of the MORTAR  

  • Mortar prepared by hand or with a screed machine (11-12 l of water/30 kg bag) shall be spread on the surface, compacted and levelled with a thickness of 3-10 cm.
  • When the surface is hardened, it shall be corrected with a mechanical finishing tool.

CONSUMPTION

11 -11.5 kg/m² for 1 cm of thickness

PACKAGING

25 kg Paper Bag,

(delivered in pallets or as sling-bags upon request.)

STORING

1 Year Shelf Life*

* If stored in its original package without opening the package under dry, frost free conditions

 

(1 week after opening the package.)

CERTIFICATE OF CONFORMITY

TS EN 13813
Complies with CT-C7-F3 Class.

RECOMMENDATION

  • No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
  • Mortar shall not be used again by mixing with water or dry mortar if its application time has expired.
  • Surface shall be watered in specific intervals within 7 days 24 hours after the application to ensure the strength of ŞAPSER® PLUS depending on the weather conditions.
  • We recommend that the application shall be performed between +5°C and +35°C.
  • We recommend you to use expansion joints with proper intervals for applications on very wide areas. (For areas greater than 25 m²)
  • ŞAPSER® PLUS shall be protected against quick drying under windy weather conditions.
  • It shall not be applied on frozen surfaces.
  • Do not apply under direct sunlight.
  • Do not go beyond the application field and the rules.
  • Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if required.
  • For detailed information, please request the security data sheet.
  • Contact us for your technical questions and for your questions about all other application conditions.