Entegre

A special plaster used for covering polystyrene heat boards.

25 kg polyethylene reinforced kraft bags, in the sling or shrink covered pallets upon request.

1 year from the date of manufacture if stored in unopened original package; under dry, frost free conditions and arranged maximum 8 bags one above the other. Suggested to be consumed in 1 week after the package is opened.

No other materials (lime, cement, gypsum etc.) should be added to the prepared mortar.

Suggested that the application is done between +5°C, +35°C.

FİNKOT® should be protected against quick drying in windy weather conditions.

Don’t go beyond the application field and rules.

As it is cement based product, do not smell it directly. Wash your eyes in case of contact. Call your doctor if it is necessary.

For detailed information please request security data sheet.

Contact us for the other application fields and for your technical questions.

1.AFİNKOT® is mixed by hand or preferably with an electrical drill (6-6.5 lt. water/25 kg bag)

2.To prepare the mortar:

Water is poured into a plastic container, then FİNKOT® will be added and mixed.

Should be waited for 5 minutes and then mixed again to obtain a fully homogeneous product.

3. The mixture is applied on the adhered heat boards as the first layer with a plaster trowel at 3 mm thickness. Fiber mesh is installed by burying into the fresh mortar, then FİNKOT® is applied again as a thin layer until the mesh is wholly covered.

5-5,5 kg/m2.

TECHNICAL DATA

The information here above were obtained in laboratory conditions. İf more information is needed, please consult to the technical department. Entegre holds the rights to change the above information. Problems rising from the wrong application are not in the responsibility of Entegre.